AllMorgan

Visit us on

  • Email
  • Facebook
  • Instagram
  • LinkedIn
  • Pinterest
  • RSS
  • YouTube
  • Home
  • About
  • Beekeeping
  • Homesteading
  • Winemaking
  • Genealogy
    • The Morgan Family Today
    • Getting Started in Genealogy
    • Favorite Genealogy Links
  • Store
You are here: Home / Archives for beekeeping

Bees face most pesticides here in the Corn Belt

February 18, 2013 by Jason 1 Comment

Written in collaboration with Tim Ives. Also referencing the research conducted by Randy Oliver.

For some of us, the winter has been harder, colder and just not too kind… but some recent discussions with fellow beekeepers Jim Orem, Garry Reeves and Jim Farmer as we drove to the ISBA spring meeting reminded me that we’re having a more typical winter for our region than the previous couple.

While this should have been obvious to me, it did take a reminder. What else would explain coming out of last winter with all my hives-a-thriving, queens-a-laying and those rainbows over my hives? Everything lead to a bumper crop of honey, the biggest crop yet… and a lot of fun. It thrust me in to the farmers markets and set the rest of the summer in motion. Well, like many green and enthusiastic minds, it took a hard winter to put me back in place. I’m still picking through my deadouts. But, even now, I remind myself there’s a purpose for everything, and my purpose is to take a harder look at what things went right, and which went wrong. I have been positioned to better understand what nature did, what I did… and how it all swirled together this winter.

For me, there’s an ebb and flow between book work and fieldwork. After so much bookworm, I shut down. I just can’t read another word about bees until I go out and play with them for a while. The 2012 season was this time for me. I went out and exhausted all I had in the field. I set up two new outyards, enjoyed the farmers markets with the surplus honey, prevented swarms, collected swarms, split hives, grew colonies and gave them to my new beekeeping friends. I built equipment, presented to cub scouts, talked about bees, wrote about bees, and even acquired two new “mentees.” During this whirlwind adventure, I put my hands on things and I tried different things, with different hive set-ups, 8-frame, or 10-frame… and I watched the affects. I was using my smartphone to beam my hive inspections into spreadsheets to form a rudimentary basis for future decisions and maneuvering. If it sounds like a lot of work, it wasn’t… for a computer guy, but my information is still scattered at best. In all cases, I made my best decisions and moved on.

Flying through hives of my own, and those of four mentees, I got a good fill, saw a lot of situations, and offered my “best” decisions to help people on things.

I be sure to remind my new beekeepers… “my instruction is my opinion, based on all I know about bees. Since learning about bees takes a lifetime, I surely don’t know the half of it, so take my advice with salt and make your own best decisions in the end.” I can offer tips, suggestions and quite a few funny stories. During this process, everyone learns something… and sometimes, they even learn what not to do. It’s real-world beekeeping happening here in the corn belt.

On particularly challenging “stumpers,” I call some mentors higher up the chain. In my darkest hour… doing my best at things and seeing the worst, it’s enough to send a man back to school to delve in to some of that book work again! A wave of deadouts made it obvious to me, but this time, it’s a mystery and a darn big one too. Somewhere, somehow, I missed something, but what? Several of my hives had very low populations at last check and I was concerned about them going into the winter. I battled beetles and suffered waves of dead bees in front of the hives earlier in the season. It’s easy to blame arbitrary possibilities, but instead, I have been doing my homework on these hives since they were three-year colonies, and a significant loss. I even sent some samples to the Beltsville Bee Lab.

This last Sat., Feb. 9, I took a ride with Jimmy O, Garry and Jim Farmer… the three gentlemen who I credit mostly for teaching me anything important about bees. True mentors, that continuously offer an incredible spectrum of knowledge from different viewpoints and approaches. Every time I speak to one of them, I either learn something new… or question something I’ve been doing. These are the most useful experiences to a growing beekeeper. The true mentoring experience is alive and well here in SE Indiana.

Over a two-hour drive to Anderson, IN to attend the ISBA spring meeting, it was non-stop chatter talking about bees–my bees, their bees, bees in general, cool things about bees… and, those darn bees aren’t reading the same books we are. We arrived at our destination an hour early, and I’ll be darned, the one beekeeper I was looking forward to catching up with was there early too. Tim Ives, who is practicing all-natural techniques was ready to tell us all about it over breakfast. First, a little background on why I wanted to meet and talk to Tim.

My recent research preparing for SIBA’s January bee school lead me to Randy Oliver, a biologist and a beekeeper who lives in Grass Valley, California. I read his daily posts on the BEE-L list, and it was his articles on Vitellogenin (Vg)-rich “fat bees” that lead me to more reading on his site. More on fat bees in a moment. After meeting and talking to Tim Ives about fat bees, it became clear to me that Tim was already privy to this research and enjoying the full benefit of Vg-rich fat bees in his apiary. In addition to “fat bee” studies, Randy Oliver was also studying the effects of corn planting and neonicotinoids on bees. He states “When I’m trying to figure something out, I generally look for the most extreme examples.  So I downloaded figures from the National Agricultural Statistics Service in order find out where in the U.S. that bees would be subjected to the most intense exposure to planting dust. I found that, incredibly, two out of every three square feet of soil in Iowa and Illinois is planted to either corn or soybeans! The vast majority of these two crops are planted with neonicotinoid-treated seed. Clearly, this would be ground zero for bee extinction.”

Apparently, in California, such a study would not be practical since there’s not nearly as much corn planting… nor the accompanying neonicotiniods as there are here in the corn belt. Randy ended up making a visit to the apiaries of Danny Slabaugh and Tim Ives and after meeting and talking to Danny and Tim, it seems Randy was surprised with what he found. He states…

“I can’t stop thinking about that annoying enigma—the successful beekeeping by Danny and Tim (and many others) in the midst of pesticide-laden fields of corn and soy. How could that be?”

Read Randy’s paper on these findings here. Once you’ve read it, you will have arrived at the same place I am and will also want an opportunity to talk to Tim Ives! Could there be a correlation between Vg-rich bees and and a tolerance to pesticides? What about that state of excellency we talk about where the hive “takes care of itself?” Tim’s beekeeping represents what many of us in SIBA strive to do. Talking to Tim, he describes to me that putting anything un-natural into bee hives will only compromise something else. Like anything else, the hive has an ideal ecosystem that it will thrive in. Tim doesn’t do any treatments to his hives (chemically, or naturally). He doesn’t feed sugar of any kind during any part of the year. He doesn’t use pollen substitutes of any kind nor does he do many inspections that include disrupting the brood chamber unless absolutely necessary. He does this right next to fields where the clothianidin, Poncho is being used, yet still manages to suffer minimal bee deaths as evidenced by incredibly strong hives. How?

Tim’s secret is “fat bees” and Randy explains fat bees best in this article. Briefly, fat bees are young/nurse bees that produce valuable Vitellogenin, or “Vg”. Vg has a high level of sugar, fat and protein and is manufactured only by nurse bees, then stored in the hypopharangeal gland in their head. Vg precursors provide the major “egg yolk proteins” that are a source of nutrients during early development of egg-laying vertebrates and invertebrates. What does this mean to us beekeepers? Quite simply, it’s the fountain of youth for your bees, it’s the “bee-knees” man! The nurse bees administer Vg to the queen, to regulate her egg-laying. They can tell her to speed up or slow down. They can administer Vg to mature adult bees (MABs) and extend their life! They can tell a forager that “we need more help in the hive” and pull a forager back in to become a hive bee again. In short, a hive rich with fat bees full of Vg, means a lot of things can start taking care of themselves… arguably, a better immunity to pesticides, a higher tolerance to mites and beetles, and a stronger precursor towards hygienics.

It still takes skill and effort to make hives full of fat bees. You are doing things, and not doing things with more intention. Tim’s hives have 3 deep boxes for brood chambers, and it’s common to have 10-18 frames of brood in its peak, and 10 and 12 supers on them during honey flows. He suggests that a minimum of three deeps is what is most natural for the bees. Consider a cut-out of a wall where the combs tend to be endless. Around now (late Feb. in our area) is when the average 2 hive body systems are on the verge of starvation, depending on the winter and level of food stores. 3 hive body systems, with enough stored honey are not facing starvation… and end up raising brood earlier. I saw this personally last Thurs (2/14) as I went through hives with Garry Reeves and saw his bees had already completed one brood cycle and were in to the second! We tipped up his candy board and saw a basketball-sized area of bees on the top frames. Tipping up the top hive body (#3, on top) showed a second basketball-sized area of bees on the top of box #2 in the middle. This suggests an already powerful cluster already in bee-manufacturing mode. I saw this in multiple 3 hive body systems of Garry’s.

So, what Tim says, and what I’ve seen at Garry’s, by having plenty of honey stores upon arriving at that critical time when the bees need it, you bolster an environment that gives you at least one brood cycle (maybe two) before the first major honey flow.

In Tim’s area, March 11 on average, pollen starts coming in. He says a typical 2 hive body system will start laying at this time and over the next 2 brood cycles (21 days) a 2 hive body system will average 12 frames of brood, but a 3 hive body system will average 18 since it incurred an earlier cycle. That’s 50% more brood in the 3 hive body system and by the end of April, a 3 hive body system can have 300% more bees versus a 2 hive body system. Of course… this is also requiring a healthy queen that is properly nourished and in her zone… laying approx. 2000-3000 eggs per day.

Now many of us question the difference of forage from area to area. While that certainly is true, consider the following. Tim says that most of the older beekeepers up his way would say their major flow doesn’t start till June (clover and alfalfa). Tim disagrees and suggests that their foraging force might not yet be strong enough, early enough to get the forage that is available sooner. A maximum foraging force will collect maximum forage. In my personal beekeeping style, my spring management has always been squarely focused on maximizing egg-laying before the  locust bloom. Then, there’s the weather variable which we’ll save for another discussion.

Tim provided me the rough/average timing for the forage in his area (North of the SIBA area) and keep in mind ours will be slightly ahead of his, and doesn’t include some forage, like the mint bloom. It’s important to watch for the signs and become familiar with what is coming in and when in your immediate area. You’ll be better equipped to understand what it means for your hives and what decisions you may need to make to accommodate.

Approx. bloom schedule near North Liberty, IN.

  • March 11, maple/willows
  • April, vast acreage of hensbit and purple deadnettle until the corn and beans are planted.
  • End of April, apple/various fruit trees and dandelions
  • May 20th, black locust, blackberries, and tulip popular shortly after.
  • Mid-June, clover and alfalfa
  • End of June, basswood
  • beginning July, catalpa
  • Mid-July, vast acreage of mint fields (St Joseph county is one of the largest mint producers in the nation)
  • End of July/First of Aug., soybean 
  • Mid-August, derth until goldenrod blooms end of August
  • Sept, various asters

To try and bring this around and summarize things, I offer you my “current” opinion. Within the corn belt, during a typical winter, we better have packed up a good, strong cluster of bees for overwintering and also make sure mites and beetles are in check.

Optimally, this strong cluster of bees will be comprised of young, nurse bees, “fat” bees. It takes getting that queen laying eggs as late in to the season as possible so that those fat bees are there… versus older MAB’s that only eat the resources and die prematurely… leaving the queen unprotected.

All our efforts over the summer should lead to disease and pest-free, strong hives at winterization. Opinions and techniques vary among all of us here. It takes, preventing swarms, watching your bottom boards, identifying pests… and dealing with them (naturally or chemically is another belief that varies among all of us). Of course ventilation, food stores and other cold weather preparations are important too… but (more and more) futile in the corn belt if you have a pest problem or old bees heading into winter.

At SIBA, we respect each others methods of beekeeping… accepting the fact that some use chemicals, or feed artificial supplements. We all strive for LIVE bees and care for them just as much as the other.

As a chemical-free beekeeper, my goal in this article, was to highlight natural beekeeping that is working… here, in the corn belt, where we’re known as “ground zero for bee extinction.” Beekeeping that is easier on the pocketbook… not needing to buy feed and medications. It’s working for people like Tim Ives who has minimized his actions with his bees to grow a colony of bees that tolerate an extreme environment and turn the heads of notable research authorities like Randy Oliver. It’s the style of beekeeping that will be my focus for the 2013 season.

This is a lot to digest, I know… and I hope to report back over the coming season with thoughts, advice and opinions about making and managing fat bees. I hope you’ll stop back. For now, I leave you with another great read from Randy Oliver… “Rules for Successful Beekeeping” and I wish everyone a successful 2013 season.

Share it:

  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • More
  • Click to share on Tumblr (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Pocket (Opens in new window)
  • Click to print (Opens in new window)

Filed Under: beekeeping Tagged With: beekeeping

Mountain Camp Method of Feeding Sugar

February 12, 2013 by Jason Leave a Comment

Myself and fellow beekeepers are big proponents of the candy board (those of us who use sugar) when winterizing a hive. A candy board is a wooden “rim” box about 1 or 2 inches deep designed to sit on top of a Langstroth hive body. View the video on how to make a candy board here. But briefly, the process of a candy board is to mix sugar with water, a little vinegar (as a mold inhibitor) and maybe even some honey bee healthy if you have some (or use the homemade essential oil recipe here) and then layer it in to the wooden candy board frame. Some people heat it and make it more in to a fondant, but we just wet it a little so that when it dries, it sticks together. We also add a pollen patty to the board before adding the sugar for the queen to use around Feb. when she starts laying again.

The "Mountain Camp" method is simply the method of feeding dry sugar poured right on to paper that lays on the top of the frame bars... or on the screen of your candy board rim. You can lay newspaper on the top frames of your hive and add a super... or you can use a candy board body. The newspaper keeps the sugar from falling through.
The “Mountain Camp” method is simply the method of feeding dry sugar poured right on to paper that lays on the top of the frame bars… or on the screen of your candy board rim. You can lay newspaper on the top frames of your hive and add a super… or you can use a candy board body. The newspaper keeps the sugar from falling through.

The “Mountain Camp” method of feeding got its name from a user using the name “Mountain Camp” on www.beesource.com (a large beekeeping discussion board). Like camping, you tend to simplify things as much as you can. The mountain camp method entails just pouring sugar directly on to some newspaper that sits on your top frames. It is simply a name for dry sugar feeding where we may otherwise add water or more effort to achieve the same effect.

Mountain Camp stated what some may call the obvious… Why go through all the work, when bees will eat sugar just poured in to the hive? Sugar is poured on to some paper to keep it from falling through. Over time, moisture will penetrate the sugar and harden it automatically. The method is easier and takes half the effort of making fondant. While others have surely used this method before, members of the Beesource community called it the “Mountain Camp Method” since this user was known for bringing it to light. The Mountain Camp Method of feeding provides all the same benefits of an overwintering hive as a candy board does while temperatures remain too cold for liquid feed.

Having additional pollen within the reach of the cluster also facilitates brood rearing when it is time. Check your sugar periodically when temperatures allow. The bees will eat a hole in the sugar pile closest to where they are. If it gets cold again, it is helpful to have that hole filled back in with sugar. We make up hardened sugar bricks to toss in… or you can lay some more paper in the hole and fill it back in with sugar. 

Here’s some tips to remember

  • Don’t allow newspaper to be exposed to the outside, beyond the hive body so moisture isn’t wicked into the hive.
  • Don’t use confectioner’s/powdered sugar as it contains corn starch, and can cause dysentery.
  • Add pollen patties or dry pollen when setting up. Watch the candy board video to hear more of these details.
  • Don’t open your hive on too cold of a day, and open it for a limited time only to reduce chilling the brood and disturbing the cluster.

If you have any additional thoughts to add, I’d love to hear them.

Share it:

  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • More
  • Click to share on Tumblr (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Pocket (Opens in new window)
  • Click to print (Opens in new window)

Filed Under: beekeeping, how-to Tagged With: beekeeping, how-to

Dealing with Bee Hive Deaouts

February 2, 2013 by Jason 1 Comment

I helped my dad with bees for a small period of time in the 80’s… when I was a teenager, and I even had a hive of my own. I don’t really count this as much experience but it was enough to make me want to pick it back up in 2009. Since then, I’ve never experienced my own deadout until this winter (2012-2013). One might suggest beginners luck, but I submit that from delving in, and getting as many mentor experiences as possible, along with doing a lot of reading, and writing about bees, I hit the ground running. It’s significant to note that I was also miticide-free and doing as much “natural” beekeeping as possible. I did feed sugar as needed up until this last season… when I decided that I was going to let the bees fend for themselves. Whether or not this contributed to my deadouts is still undecided, as you will see.

On the last warm day, it was apparent to me that I lost several hives as only one hive had bees out flying. So, I cracked in to them to find what I expected… the sad sight that all beekeepers will eventually experience. All the bees, frozen in time… with the queen right there in the center… in each hive. There was still plenty of honey left to eat too, so what happened?

Here is a serious learning opportunity for any beekeeper. One must rise above discouragement, take the lumps and do a little detective work to find out what went wrong. At last hive check (before winter) I had concerns about a number of my hives. Particularly, the populations just weren’t there. We like to see queens laying eggs later into the season and a good amount of bees when were taking supers off and preparing for winterization. Several of my hives just didn’t have that. I think I was maybe short on a good pollen supply too. We like to know that weve been proactive in dealing with SHB (small hive beetle) and varroa but I was battling SHB in all my hives in one yard. However, at another yard, one hive whose populations were great, and had no beetles also became one of my deadouts! This is the video that follows. 

I recorded this deadout because it’s tough to see the cause of this one. It wasn’t starvation, it wasn’t moisture/wet bees… I didn’t suspect varroa (but this was the cause, as you’ll see) There is another hive right next to this one doing fine.

I run screen bottoms on all my hives and have since 2009. Haven’t lost any hives until now, so I don’t think having these screens wide open was a contributor. I thought I OK on keeping varroa under control but still didn’t rule it out. I’m sure there are mites in all my hives, but nothing suggesting the populations were enough to overrun. There looked to be traces of guanine on a few cell ceilings. We dusted probably 5 times over last season, once every 1-2 weeks apart and stopped to allow them to work on their winter cluster.

Since we don’t know everything about CCD yet, I tend to research all I can before settling on this still-mysterious problem. The latest research on CCD suggests there is the presence of a virus and a disease. The presence of both means their doom. Here is SE Indiana, most of us don’t move our hives to provide pollination services and our bees forage on much of the same stuff. We generally do what we can to keep the bees happy and healthy. Sure, we know there are pesticides used in our foraging areas, and since I can’t test for virii or diseases, I’m sending samples to the Beltsville Bee Lab and will update back when I get results.

Take a look over this hive with me.

UPDATE 3-1-13: The results came back and it was varroa. No trace of nosema nor tracheal mites. Varroa was 10.5 per 100 bees! Proof that varroa can take them out right under your eyes!

UPDATE 4-12-13: Take a look at the alcohol washes I’m doing now to test deadouts for varroa.

Share it:

  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • More
  • Click to share on Tumblr (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Pocket (Opens in new window)
  • Click to print (Opens in new window)

Filed Under: beekeeping, how-to, videos Tagged With: beekeeping, how-to, videos

Larry Kemerly talks harvesting bee pollen

December 23, 2012 by Jason Leave a Comment

Larry Kemmerly from the Indiana State Beekeepers Association (ISBA) speaks to Southeast Indiana Beekeepers about collecting and processing pollen for consumption and sale at farmers markets. Larry collects and sells about 50 lbs of pollen per year. While Larry’s methods are by no means the defacto, we asked him to explain how he does it, and he did in great detail.

He also showed and described various types of pollen traps and answered our questions. Theories on pollen benefits include helping skin, cardio-vascular functions, prostate, allergy relief, and more. If you are interested in collecting pollen from your hives, watch the entire 45-minute presentation. A lot is covered. Larry graciously volunteered to make the drive out to us and there were 60mph winds (and snow flurries) outside that night. So our group passed the hat to pay for his gas and efforts.

Enjoy, and comment below!

Share it:

  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • More
  • Click to share on Tumblr (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Pocket (Opens in new window)
  • Click to print (Opens in new window)

Filed Under: beekeeping, how-to, videos Tagged With: beekeeping, how-to, videos

Small Hive Beetle (SHB) What to do?

September 26, 2012 by Jason Leave a Comment

As a beekeeper in my third season, I can proudly say that I haven’t lost a hive yet! I’m not worrying about jinxing myself either because I know I eventually will. We all will. Sometimes, there’s just nothing we can do. But for me, I don’t go down without a fight. Despite regular inspections, things can just come out of nowhere… such is the case of small hive beetle for me. 

The other day, I went through seven hives. Now, I normally see a couple beetles here and there in almost all these hives. I assured myself early on that since I saw one beetle, more will be coming! So it just made sense that where there is one… there will be more!

Alabama beekeeper, Guy Ross sent me this photo. Traps made from CD cases caught this many beetles in a few days. Guy had these on top of the inner cover. I've made the same traps, but I spray painted my cases black and the I'm using is boric acid, available in a powder form from the local pharmacy mixed with honey and pollen.
Alabama beekeeper, Guy Ross sent me this photo. Traps made from CD cases caught this many beetles in a few days. Guy had these on top of the inner cover. I’ve made the same traps, but I spray painted my cases black and the I’m using is boric acid, available in a powder form from the local pharmacy mixed with honey and pollen.

So, I took immediate action. First, here’s a link I put up in the SIBA site a while back that tells more about SHB and includes pictures and links to some great information. I have had two beetle blaster traps in each hive (one on top of each medium super) for most of the season. I see a beetle in these traps here and there, but at last inspection, they have ramped up. One hive in particular had an alarming number of beetles crawling around. I didn’t see any honey or comb damage yet, but there were about 10 beetles on one frame!

The best you can do to combat hive beetle (SHB) is keep the populations knocked down, by using a multi-pronged approach (a variety of methods) before it’s too late.

Here’s some points to keep in mind

  • Let’s cover the basics that are well-known. A strong hive is simply the best way to combat not only SHB, but a variety of hive ailments, such as Varroa and the diseases associated with it. Hives in full sun are also likely to have less SHB then those in shade or part-shade.
  • As Sean Burgess mentioned at September meeting, spraying the area around your hives with a solution of water and salt (about a handful of salt per 2 gallons of water) helps kill off SHB larva that go into the soil to pupate and emerge the next season. Spray in the fall and again in the spring. It obviously helps as a weed control too.
  • Another good point that Sean brought up was limit your hive inspections in the fall. As hard as that may be for some of us, hopefully, we’ve been keeping an eye on things up until now to feel good about delaying the next inspection. The idea is, bees will chase SHB up into the top supers and propolize them in to areas and trap them. When we go in and crack the covers and frames apart, we release these beetles to cause more trouble. I often see them scurrying when I take off the top cover.
  • Beetles like the dark… and they are scurrying to the dark places when you take off the cover. When I inspect frames, I look closely down into the cells around the sides of the frames and in the corners. They like the dark comb too! I flip it over and look in the slot under the bottom bars (if you have that type of frame) – They are in there, you can crush them with your hive tool in an easy swipe across the bottom. Look also around the frame rests on either side of the hive. That is a common place for them to hide… especially in the older “raised-L” type rests. Bees will to try to glue and trap them in to those spaces.
  • Then, there are a variety of ways to trap them and again, a few variations of traps may help knock them down more effectively and I’ll list some of them below.

Of course, if you have many hives, cheap methods are preferred. The beetle blasters are nice but often get a little messy and you also have to space the frames so that they fit down between the top bars. The bees propolize around it and glue it in to place. First thing I do when I open my hive is take my hive tool and run it across the top of this trap to crush any beetles that may be hiding below it… then I remove it to conduct my inspection.

The next cheap alternative for me was the CD jewel case traps to add in addition to the beetle blasters. I made up a bunch of them. Find the directions here on making SHB traps from CD cases. Here is a video for making SHB traps from CD cases too. The effectiveness shown to me by others, including Guy Ross of Alabama who sent me the picture above of his traps was compelling enough to give it a try. I myself am using a mixture of honey, pollen and boric acid… making sure the mixture is thick and doughy enough so that it will not run out of the case. If the bees get at this, it will kill them so be careful… and be careful handling boric acid (a roach/rat killer) or any other hazardous material to kill SHB. I also read that Borax, (sodium tetraborate decahydrate) works well in place of boric acid, and can be bought as a laundry booster cheaper than boric acid. It used to be used as a gelling agent in foods before it got outlawed because of toxic effects at high doses. That said, it’s pretty non-toxic to humans, naturally occurring, and lethal to any insect that eats it. Just don’t let your bees get any of it or you’ll kill them too. I’ll report back on this blog how I do soon.

Of course, there is the Freeman trap that is an oil pan under a screen bottom board that rates quite highly! These are of course more expensive and if you need to get them for many hives, it adds up. Here’s a video that covers the Freeman SHB trap.

My final thoughts… I’m putting this out there as the approach I am taking to battle SHB this fall. It may change next season. I’m also not declaring this as the defacto method either. The boric acid is the first-ever “chemical” that I’ll knowingly be putting in to my hives. After a lot of thought, I decided that if I can keep the boric acid contained in the CD case, there should be no ill-affects to the hive. After reading further, I’ve found no cases where the boric acid turns to gas to contaminate the hive either. Last, I surely would love to hear your comments, corrections and suggestions to this body of information as we’re all on the same team when it comes to defending the bees. Good luck this season and death to SHB!

October 12, 2012 Update: Update on my CD Case success. I have to say, I’m not impressed. After 2 weeks, not a single beetle in my trap. I know they are in there because my oil traps (beetle blasters) are working. They have a lot in them, so, I’ll stick with the beetle blasters that have been working.

A reminder that I used these cases on my inner covers under the telescoping cover. I also have to admit… I used arrowroot powder to thicken up the poison mixture so there was less chance of anything coming out of the CD case. A big concern of mine was somehow a beetle making it out of the trap and tracking poison all over the hive. There was no indication of that, but I would have to think there would be one in my trap. I wonder if the arrowroot powder could have reduced the potency of the poison? It was probably a mistake to add it and instead I should have used the honey more sparingly in the honey-pollen mixture. I placed the CD cases on top of the inner cover (because I couldn’t bring myself to putting the poison-filled cases down into my supers. I have seen many beetles on my top covers… so I know they are up there. Regardless of what I could have done wrong, the CD cases are out. I have too much success with the beetle blasters and can rest a whole lot better knowing there is no poison in my hives. There are too many safer avenues that can be taken to battle SHB. Just my opinions 🙂

August 2013, Update: I’ve since moved from the beetle blasters… to the beetle jails. I like how they cling across the top of one frame and can be removed with a frame… vs. pulling out the blaster and having ti put it back in. I found myself always forgetting to put them back in and then having to open the hive again to insert it. The jails can also be cleaned out and reused easier. They are $1 more, so you can decide. I find it’s worth it.

Share it:

  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • More
  • Click to share on Tumblr (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Pocket (Opens in new window)
  • Click to print (Opens in new window)

Filed Under: beekeeping, how-to Tagged With: beekeeping, how-to

  • « Previous Page
  • 1
  • …
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • Next Page »

Search the site

Recent Posts

  • Seasoned cauliflower & quinoa burgers May 7, 2021
  • Preserved Black Walnuts January 17, 2020
  • Nocino Walnut Liqueur July 25, 2019
  • Requeening honeybee colonies with cells July 9, 2019
  • Mushroom Jerky May 27, 2019

Archives

Categories

  • beekeeping (40)
  • charcuterie (13)
  • cheesemaking (7)
  • do-it-yourself (15)
  • family (20)
  • food/culinary (47)
  • friends (21)
  • gardening (3)
  • genealogy (15)
  • grape growing (10)
  • health (3)
  • homesteading (38)
  • how-to (67)
  • music (3)
  • outdoors (30)
  • rants (6)
  • recipe (21)
  • Uncategorized (40)
  • videos (22)
  • winemaking (21)

About AllMorgan

AllMorgan started as a family blog to keep extended family and friends around the world apprised on what's going on at the Morgan Ranch. Over the years, it grew in to something so much more.

Learn More

Welcome to AllMorgan

AllMorgan started as a family blog to keep extended family and friends around the world apprised on what's going on at our Indiana homestead. It always been a cross between a family diary and photo … Read more

Did you know?

The queen bee doesn’t decide what happens in a colony. The workers do. They adjust her feeding to make her do what the majority says. The queen can’t feed herself.

Copyright © 2025 · Outreach Pro on Genesis Framework · WordPress · Log in